2
3
SPECIFICATIONS
Specifications are
subject to change
without notice
IMPORTANT SAFETY INFORMATION
IMPORTANT SAFETY INFORMATION
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND
WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO
SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
Specifications:
Capacity: ................................ 4000 lbs.
Low Lift Height: ....................... 2 3/4 in.
Max. Lift Height: ........................... 20 in.
Overall Dimensions:
Length: ................................... 26 1/2 In.
Width: ..................................... 13 1/2 In.
Height: ............................................ 9 In.
........................................
50 3/8 with bar
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp
or wet locations. Don’t expose to rain. Keep work area well lighted. Do not
use electrically powered tools in the presence of flammable gases or liquids.
Do not bring combustible materials near the tools.
3. Keep children away. Children must never be allowed in the work area. Do not
let them handle machines, tools, or extension cords.
4. Store idle equipment. When not in use, tools must be stored in a dry location
to inhibit rust. Always lock up tools and keep out of reach of children and other
untrained persons. Switch off all unused electrical tools when stored. Tools
are dangerous in the hands of untrained users.
5. This is a lifting device only. Do not move load while it is on the jack. Load
must be supported immediately by Jack Stands or other appropriate means.
6. Do not overload jack beyond rated capacity. Overloading can cause damage
to or failure of the jack.
7. REFER TO YOUR VEHICLE OWNERS MANUAL FOR PROPER JACKING
PROCEDURES. Lift only on areas of the vehicle as specified by the vehicle
manufacturer.
8. Work Safe. Keep proper footing and balance at all times. Do not reach over or
across running machines, hoses, etc.
9. This jack is designed for use only on hard level surfaces capable of sustain-
ing the load. Use of jack on other than hard level surfaces can result in jack
instability and possible loss of load.
10. Stay alert. Watch what you are doing, us common sense. Be sure all
personnel are clear of load before lowering load. Ensure that no personnel
pass underneath load until load is securely supported by jack stands Do not
operate any tool when you are tired.
11. Take care of your jack. Keep the jack clean for better and safer work. Follow
the maintenance instructions and the notices. Regularly inspect all parts.
Repairs should only be carried out by a qualified technician. Use only original
PERFORMANCE TOOL® replacement parts.
12. Check for damaged parts. Before using any tool, any part that appears dam-
aged should be carefully checked to determine that it will operate properly
and perform its intended function. Check for alignment and binding of moving
parts; any broken parts or mounting fixtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired
or replaced by a qualified technician.
13. Repairs should only be carried out by a qualified electrician using original
PERFORMANCE TOOLS® replacement parts. Failure to do so can lead to
accidents for the operator. Use of any other parts will void the warranty. Only
use accessories intended for use with this tool. Approved accessories are
available from Performance Tool®.Use only accessories that are recommend-
ed by the manufacturer for your model. Accessories that may be suitable for
one tool may become hazardous when used on another tool.
14. Do not operate any tool if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate any tool.
15. Maintenance. For your safety, maintenance should be performed regularly by
a qualified technician.
WARNING: This product and its packaging contain a chemical known to the
State of California to cause cancer, birth defects, or other reproductive harm.
WARNING: The warnings, cautions, and instructions discussed in this instruc-
tion manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are factors
which cannot be built into this product, but must be supplied by the operator.
Read and understand all of the instructions provided in the instruction manual of
this product, as well as, any other tool (s) used with this product.
