background image

 DANGER 

Indicates an imminently hazardous situation that, if 

not avoided, WILL result in death or serious injury.

 WARNING 

Indicates a potentially hazardous situation that, if 

not avoided, COULD result in death or serious injury.

 CAUTION 

Indicates a potentially hazardous situation that, if 

not avoided, MAY result in minor or moderate injury.

NOTICE

 Indicates important information, which if not 

followed, MAY cause damage to equipment.

 

SAFETY GUIDELINES / DEFINITIONS

 

 

 

SPECIFICATIONS

 

IMPORTANT SAFETY INFORMATION

Specifications are subject to change without notice.

WARNING

READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY 

RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.

1. Study, understand and follow all instructions before operat-

ing this device.

2. DO NOT exceed rated capacity. Overloading can cause 

damage to or failure of this product.

3. Use only on hard, level surface capable of sustaining the 

load. Use of jack on other than hard level surfaces can 

result in jack instability and possible loss of load.

4. Lifting device only. Immediately after lifting, support the 

vehicle with appropriate means. Ensure that no personnel 

pass underneath load until load is securely supported by 

jack stands.

5. DO NOT adjust safety valve.
6. Wear ANSI approved safety goggles and heavy duty work 

gloves during use.

7. Keep clear of load while lifting and lowering.

8. Lower load slowly.
9. DO NOT use for aircraft purposes.
10. Apply parking brake and chock tires before lifting vehicle.
11. Lift vehicle only at vehicle manufacturer recommended lift 

locations.

12. Inspect before every use; do not use if parts are loose or 

damaged.

13. Do not alter this product in any way.
14. Keep your work area clean and well lit. Cluttered work 

areas invite accidents.

15. Keep bystanders, children, and visitors away while operat-

ing this product. Distractions can cause you to lose control.

16. Stay alert. Watch what you are doing, and use common 

sense when operating this product. Do not use this product 

Warning: 

This is a lifting device only. Load must be supported immediately by Jack Stands.

WARNING:

 Read and understand this entire 

instruction manual before attempting to assemble, 

install, operate or maintain this product. Failure to 

comply with the instructions may result in serious 

personal injury and/or property damage!

The following signal words are used to emphasize 
safety warnings that must be followed when using 
this  product: 

This instruction manual is intended for your benefit. Please read and follow the safety, installation, maintenance and troubleshooting steps 
described within to ensure your safety and satisfaction. The contents of this instruction manual are based upon the latest product information 
available at the time of publication. The manufacturer reserves the right to make product changes at any time without notice. 

After opening the carton, unpack your new product and related parts & accessories. Please inspect it carefully 

for any damage that may have occurred during transit. Please check it against the photograph on carton. If any 

parts are missing, please call customer service at 1-800-426-1262 between 6 a.m. and 5 p.m. Pacific time. 

WARNING 

DO NOT operate this product if damaged during shipment, handling or misuse. Do not operate the product until the 

parts have been replaced or the fault rectified. Failure to do so may result in serious personal injury or property damage. All 

damaged parts must be repaired or replaced as needed prior to operating this product. Check to see that all nuts, bolts and 

fittings are secure before putting this product into service. If you have any questions, or require assistance with damaged or 

missing parts, please contact our factory customer service department at: 1-800-426-1262.

Please have the serial number, model number, and date of purchase available for reference when calling.

Capacity: .......................................................................................................................... 4,500 lbs.
Minimum Lift Height: .........................................................................................................  5 1/4 in.
Maximum Lift Height: ......................................................................................................  15 1/ in.
Base Length: ..........................................................................................................................  17 in.
Base Width: ..............................................................................................................................  8 in.

Содержание W1611









Отзывы: