Performance Tool M547, Руководство пользователя, Страница: 3 / 4

1. Do not put additional pressure on the machine. This will only reduce sanding efficiency
and shorten the tool's life. We recommend the air pressure of this grinder at 90 PSI.
2. When using the grinder be careful not to exert excessive force. Too much force could be
hazardous if it caused the cutting tool spindle to bend or break.
3. DO NOT allow tool to free run for an extended period of time as this will shorten its life.
4. Lubricate the air motor with a good grade of air tool oil and drain the tank daily. Grit or
gum deposits in the tool may cut power and may be corrected by cleaning the air
strainer and flushing out the tool with gum solvent oil.
• Never install a carbide tipped or steel circular saw blade for use on this Die Grinder.
• Never install a wood carving blade, carving disc with chain saw cutters, or a cutting
carving disc on this Die Grinder.
• All accessories must be rated for at least 54,000 RPM. Wheels and other accessories
running over rated speed can fly apart and cause injury.
• Use eye and ear protection. Always wear ANSI approved impact safety goggles.
• Wear a full face shield if you are producing metal filings or wood chips. Wear an ANSI
approved dust mask or respirator when working around metal, wood, and chemical
dusts and mists.
• WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities, contain chemicals known [to the State of California] to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
1. Lead from lead-based paints;
2. Crystalline silica from bricks and cement or other masonry products;
3. Arsenic and chromium from chemically treated lumber.
• Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
OPERATION
Air Inlet
Adjustable Throttle
PARTS LIST
INDEX DESCRIPTION QTY INDEX DESCRIPTION QTY
1 Clamping nut 1
2 Collet 1
3 Front cover 1
4 Collet foundation 1
5 Ball bearing 1
6 Spacer 1
7 Lateral disc 1
8 Cylinder 1
9 Rotor 1
10 Rotor blade 4
11 Pin 1
12 Bearing plate 1
13 Ball bearing 1
14 Intake plate 1
15 Sleeve 1
16 Intake tube 1
17 Hose Plug 1
18 Pin 1
19 Sliding knob 1
20 Bearing bushing 1
21 O-ring 1
22 Screw 1
23 Read end holder 1
4.
5 .