1 YEAR LIMITED WARRANTY
PERFORMANCE TOOL® extends only the following warranties, and only to original retail purchasers. These warranties give specific legal rights.
Except where prohibited by local law, the law of the State of Washington governs all warranties and all exclusions and limitations of warranties
and remedies. There may be other rights which vary from state to state.
PERFORMANCE TOOL® warrants the product to be free from defects in materials and workmanship under normal use and service. A defective
product may be returned for a free replacement within 90 days from the date of purchase, provided that product is returned to place of
purchase immediately after discovery of defect. After 90 days and up to one year from date of purchase, PERFORMANCE TOOL® will replace at
no charge any parts which our examination shall disclose to be defective and under warranty. These warranties shall be valid only when a sales
receipt showing the date of purchase accompanies the defective product or defective part (s) being returned. For part (s) after 90 days, please
remit your request, postage prepaid to:
PERFORMANCE TOOL, P.O. Box 88259 Tukwila, WA 98138
These warranties exclude blades, bits, punches, dies, bulbs, fuses, hoses, and other consumables which must be replaced under normal use
and service. These warranties shall not apply to any product or part which is used for a purpose for which it is not designed, or which has been
repaired or altered in any way so as to affect adversely its performance or reliability, nor shall these warranties apply to any product or part
which has been subject to misuse, neglect, accident or wear and tear incident to normal use and service.
PERFORMANCE TOOL® does not authorize any other person to make any warranty or to assume any liability in connection with its products.
Except for warranties of title and the limited express warranties set forth above, PERFORMANCE TOOL® makes no express or implied
warranties of any kind with respect to its products. In particular, PERFORMANCE TOOL® makes no implied warranty of merchantability and no
implied warranty of fitness for any particular purpose, except that for goods purchased primarily for personal, family or household use and not
for commercial or business use, PERFORMANCE TOOL® makes an implied warranty of merchantability (and, if otherwise applicable, an
implied warranty of fitness for a particular purpose), but only for the particular qualities or characteristics, and for the duration, expressly
warranted above.
The laws on limitation of implied warranties may differ from state to state, so the above limitations may not apply in all cases.
PERFORMANCE TOOL® shall not be liable for consequential, incidental or special damages resulting from or in any manner related to any
product, or to the design, use, or any inability to use the product. The sole and exclusive remedy for a defective product or part shall be the
repair, or replacement thereof as provided above. The laws on limitation of remedies or on consequential, incidental or special damages may
vary from state to state, so the above limitations may not apply in all cases.
© Copyright 2015 WILMAR CORPORATION, P.O. Box 88259 Tukwila, WA 98138
IMPORTANT SAFETY INFORMATION
WARNING! READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE
OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY
DAMAGE AND WILL VOID WARRANTY.
1. Ensure all workshop safety rules, regulations and conditions are complied with when using this tool.
2. Maintain the screwdriver in good condition.
3. The screwdriver is a precision tool. DO NOT drop it or abuse it.
4. Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
5. Keep children and unauthorized persons away from the working area.
6.
WARNING! DO NOT use the screwdriver if damaged or thought to be faulty.
7. After use adjust to lowest torque setting (but not below), clean and store in a safe, dry, childproof location.
1. Hold the screwdriver in one hand, and using your other hand, pull down and hold the adjusting
ring at the drive end of the screwdriver:
Turn handle clockwise to increase torque setting
Turn handle counterclockwise to decrease torque setting
2. Center line on in/lbs scale indicates setting. NOTE: the torque setting is indicated by where the
line from each number meets the center line. Not by the number itself.
3. Fractions of an inch pound are indicated by the 0-9 numbers on the cap portion of the handle.
4. When tightening the screw, nut or bolt, you will feel the torque mechanism click at the appropri-
ate torque setting. Immediately stop applying force to avoid over tightening or damage.
5. The shaft of the driver is designed for use with standard ¼” Hex bits and adaptors. The included
¼” Drive socket adaptor allows for use with ¼” drive sockets.
OPERATION
