PerfectTron INS8145A, Руководство пользователя

Страница: 28 / 80

INS8145A ATX MB User’s Manual
www.perfectron.com
9. Rotate the load lever (A) and secure it to the retention tab (B)..
3.2 System Memory
The IN8145A supports up to 32GB of DDR3 1333 SDRAM in four 240-pin
DIMM sockets. See Figure 1-2 on page 11 for DIMM socket locations.
3.2.1 Memory Configurations
Dual channel configuration is supported by the IN8145A as follows:
Channel A: DIMMA1 and DIMMA2
Channel B: DIMMB1 and DIMMB2
Unbuffered non-ECC DDR2 DIMMs with capacities of 256 MB, 512 MB, 1 GB
and 2 GB can be installed into the DIMM sockets as follows:

Memory modules of varying sizes may be installed in Channel A and
Channel B. The system maps the total size of the channel with the lowest
capacity for dual-channel configuration. Any excess memory from the
channel with higher capacity is then mapped for single-channel operation.

Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules from
the same vendor.

Due to chipset resource allocation, the system may detect less than 4 GB
system memory when four 1 GB DDR2 memory modules are installed.
Note: Windows XP 32-bit operation system does not support Physical
Address Extension (PAE).

The IN8145A does not support memory modules with 128 MB chips or
double-sided x16 memory modules.
27