PerfecTron OXY5737A страница 49 Скачать руководство пользователя

Страница: 49 / 75

OXY5737A User’s Manual V1.1

www.perfectron.com

Software Feature Mask Configuration

RADI OROM/RST driver will refer to the SWFW configuration to enable or disable the storage features.

RAID0:

Enable or disable RAID0 feature.

RAID1:

Enable or disable RAID1 feature.

RAID10:

Enable or disable RAID10 feature.

RAID5:

Enable or disable RAID5 feature.

Intel Rapid Recovery Technology:

Enable or disable Intel Rapid Recovery Technology.

OROM UI and Banner:

If enabled, then the OROM UI is shown. Otherwise, no OROM banner

or information will be displayed if all disks and RAID volumes are Normal.

HDD unlock:

If enabled, indicates that the HDD password unlock in the OS is enabled.

LED Locate:

If enabled, indicates that the LED/SGPIO hardware is attached and ping yo locate features

is enabled on the OS.

IRRT Only on eSATA:

If enabled, then only IRRT volumes can span internal and eSATA drives. If disabled,

then any RAID volume can span internal and eSATA drives.

Smart Response Technology:

Enabled or disable Smart Response Technology.

OROM UI Delay:

If enabled, indicates the delay of the OROM UI Splash Screen in a normal status. The

options are 2 seconds, 4 seconds, 6 seconds, 8 seconds.

Serial ATA Port 0

Port 0:

Enable or disable SATA port

Hot Plug:

Designates this port as Hot Pluggable.

External SATA:

External SATA support.

SATA device type:

Identify the SATA port is connected to Solid State Drive or Hard Disk Drive.

Spin Up Device:

On an edge detec from 0 to 1, the PCH starts a COMRESET initialization sequence to

the device.

Serial ATA Port 1

Port 1:

Enable or disable SATA port

Hot Plug:

Designates this port as Hot Pluggable.

External SATA:

External SATA support.

SATA device type:

Identify the SATA port is connected to Solid State Drive or Hard Disk Drive.

Spin Up Device:

On an edge detec from 0 to 1, the PCH starts a COMRESET initialization sequence to

the device.

Содержание OXY5737A












































































Результаты поиска

Содержание OXY5737A

Отзывы:

Похожие инструкции для OXY5737A

Бренды по названию

Популярные бренды

PerfecTron OXY5737A, Руководство пользователя

Результаты поиска

Содержание OXY5737A

Отзывы:

Похожие инструкции для OXY5737A

Бренды по названию

Популярные бренды