4. Then “Equaliser” will be displayed, rotate the
Tuning / Select knob
to select “Time/
Date” and press the knob to confirm.
5. Rotate the
Tuning / Select knob
to select “Time auto update” and press the knob.
6. Rotate the
Tuning / Select knob
to select
“Update from DAB”
Radio will automatically synchronize the date/time from
current DAB station.
“Update from FM”
Radio will automatically synchronize the date/time from
current FM station.
“No update”
Radio will stop updating date/time from any of the radio
stations.
7. Press the knob again to confirm and finish setting.
Note
: If reception is good and you have selected the “Update from DAB” or “Update
from FM” option from Auto Update option, the time will be automatically updated. Time
synchronisation can take several minutes. The automatic time setting is always activated
when the radio is switched from standby to last played radio mode.
EQUALISER
The sound on
Powerplayer
can be adjusted to suit your personal taste for the material
that you are listening to. The radio can be set to loudness EQ mode or by setting the
treble and bass levels to your own preferences which can be accessed from the My EQ
menu item.
1. Press the
Power button
to switch on the radio.
2. Press the
Menu button
to display current menu.
3. Rotate the
Tuning / Select knob
to select “System settings” and press the knob to
enter system menu.
4. Rotate the
Tuning / Select knob
until “Equalizer” is highlighted, press the knob to
confirm.
5. Rotate the
Tuning / Select knob
to cycle through Loudness On, Loudness Off, My
EQ and My EQ profile setup.
Note
: The Loudness function enables to get compensation on lower and higher
frequency. The effect will be more audible when the radio is in a lower volume level
(Dynamic Loudness).
Setting up your My EQ profile
If you would want to set up a custom treble and bass setting, please follow the below
steps.
1. Press the
Power button
to switch on the radio.
2. Press the
Volume / Equaliser knob
to enter the “Equaliser” menu; or
3. Press the
Menu button
to display current menu.
4. Rotate the
Tuning / Select knob
to select “System settings” and press the knob to
enter system menu.
5. Rotate the
Tuning / Select knob
until “Equaliser” is highlighted, press the knob to
confirm.
6. Rotate the
Tuning / Select knob
to select “My EQ profile setup” then press the
knob again.
7. Rotate the
Tuning / Select knob
to select “Bass”, then press the knob to enter bass
configuration menu.
8. Rotate the
Tuning / Select knob
to adjust the bass level from “-10” to “+10”, then
press the knob again to confirm the bass setting.
9. If you wish to set treble, rotate the
Tuning / Select knob
to select “Treble” in the
menu of “My EQ profile setup”, then press the knob to enter treble configuration
menu.
10. Rotate the
Tuning / Select knob
to adjust the treble level from “-10” to “+10”; then
press the knob again to confirm the treble setting.
11. If you wish to setup the dynamic level, rotate the
Tuning / Select knob
to select
“Dynamic level” in the menu of “My EQ profile setup”, then press the knob to enter
dynamic level configuration menu.
12. Rotate the
Tuning / Select knob
to adjust the level, then press the knob again to
confirm the level setting.
The “Dynamic Level” is mostly effective in the so called mid tone area and can be set ,to
user preference, to harden or soften the sound image.
SETTING ALARM CLOCK
Powerplayer
has two separate alarms which can be set to wake you to either the radio
or a buzzer alarm. In the event of a power interruption
Powerplayer
has built in memory
that will retain your alarm settings.
Ensure that the time is set correctly before setting the alarms.
1. With
Powerplayer
switched on, press the
Menu button
to access the menu for the
current mode. Rotate the
Tuning / Select knob
until 'Main menu' is highlighted on
the display. Press the
knob
to enter the 'Main menu'.
2. Rotate the
Tuning / Select knob
until 'Alarm' is selected on the display. Press the
knob
to see the current alarm settings. If no change is required, press the
Menu
button
to exit.
3. Rotate the
Tuning / Select knob
until the desired alarm (1 or 2) is highlighted on
the display. Press the
knob
to enter alarm setup.
4. Rotate the
Tuning / Select knob
until 'Time' is highlighted on the display. Press the
knob
to adjust the alarm time.
5. Rotate the
Tuning / Select knob
to choose the alarm hour. Press the
knob
to
confirm the setting.
23
24
GB
GB
