manualshive.com logo in svg

PERFECTION-SCHWANK GL18NG, Руководство владельца по эксплуатации и установке, Страница: 29 / 32

Поделиться
Скачать
PERFECTION-SCHWANK GL18NG Скачать руководство пользователя страница 29

29

103089

REPLACEMENT

PARTS

Note:

 Use only original replacement parts. This will protect your warranty cover-

age for parts replaced under warranty.

Parts Under Warranty

Contact authorized dealers of this product. If they can’t supply original replace-
ment part(s), call 

Perfection-Schwank’s Technical Service Department at

1-800-776-8459 (outside Georgia) or 706-554-2101.

When calling 

Perfection-Schwank

, have ready

• your name
• your address
• model number of your heater
• how heater was malfunctioning
• type of gas used (propane/LP or natural gas)
• purchase date

Usually, we will ask you to return the defective part to the factory.

Parts Not Under Warranty

Contact authorized dealers of this product. If they can’t supply original replace-
ment part(s) call 

Perfection-Schwank’s Technical Service Department at

1-800-776-8459 (outside Georgia) or 706-554-2101 

for referral information.

When calling 

Perfection-Schwank

, have ready

• model number of your heater
• the replacement part number

ACCESSORIES

Purchase these heater accessories from your local dealer. If they can not supply
these accessories, call 

Perfection-Schwank’s 

 Parts Department 

at

1-800-776-8459 (outside Georgia) or 706-554-2101 

for information. You can

also write to the address listed on the back page of this manual.

BLACK FIREPLACE
HOOD - GLH100BL

For all models. Helps
deflect heat away from
mantel or wall above
fireplace.

BRASS FIREPLACE
HOOD - GLH101BR

For all models. Helps
deflect heat away from
mantel or wall above
fireplace.

LAVA ROCK - GA6060

For all models. Order when additional rock is desired. (3 lb. bag)

DAMPER CLAMP - GA6080

For variably controlled models. Permanently opens chimney flue damper for
vented operation.

Содержание GL18NG

































Отзывы:

Нет отзывов