perfect pro Fatbox, Руководство по эксплуатации

Страница: 10 / 116

9
Radio Operation
1. Press the Power button to turn on the radio.
2. Select the required waveband by pressing the Band button.
3. Stand up the FM rubber antenna properly to get best reception.
For AM ( MW ) band, rotate the radio to get best signal.
4. Rotate the Tuning Control knob will change the frequency in the
following increments.
FM: 50 or 100 kHz
AM ( MW ): 9 or 10 kHz
5. Select required EQ and stereo/mono mode.
6. Rotate the volume control to get required sound level.
7. To turn off the radio, press the Power button.
Display will show OFF.
Memory preset stations
There are 6 memory presets for each waveband. Storing stations
in preset memories, follow below steps.
1. Press the Power button to turn on the radio.
2. Tune to required station pressing Band button and rotate
Tuning Control.
3. Press and hold down the required preset until the display M
stop flashing. The preset number will appear in the display
together with M and the station will be stored under chosen
preset button.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories can be over written by
following above procedures.