headset with the new device according to steps 1
～
6 mentioned above.
Pairing the headset with a Bluetooth transmitter
You can connect the headset to a Bluetooth transmitter to enjoy music
wirelessly. Hereby take BTT010 (Bluetooth transmitter for iPod, not
included) for example. The pairing steps are as follows:
1)
Place the headset and the Bluetooth transmitter where they are easily
viewable by no more than 1 meter apart;
2)
Enter the headset’s pairing mode (Please refer to “How to enter pairing
mode);
3)
Turn on the Bluetooth transmitter. It will search for Bluetooth devices
automatically and send a pairing request;
4)
When the headset requests to enter a PIN No., the transmitter will
response “0000” automatically;
5)
After successful pairing and connecting, blue LED of the headset will
flash twice every 4 seconds.
Remarks:
The pairing password of the headset is “0000”. So, the headset can only
pair with a Bluetooth transmitter whose pairing password is “0000”.
If pairing still fails after several tries, please refer to the Bluetooth
transmitter’s user’s manual for further information.
5
Multi-pairing
The headset can connect with two devices at most. One is a Bluetooth cell
phone supporting HFP profile, the other one is a Bluetooth music device
supporting A2DP profile. If you want to finish the multi-pairing, please refer
to the following steps:
1)
Firstly, pair the headset with a Bluetooth transmitter (refer to “pairing the
headset with a Bluetooth transmitter);
2)
Turn off the Bluetooth transmitter;
