Perfect Aire PROAIRE SPOT6800, Руководство пользователя

Страница: 8 / 12

6
SAFETY & PRECAUTIONS
CONTINUED CONTINUED
OPERATION INSTRUCTIONS
(Continued)
Emptying the condensate tank:
1. Shut off the air conditioner by pressing the power switch to the “O” position.
2. Locate the condensate tank.
3. Remove the condensate tank and empty the contents.
4. Re-install the condensate tank after emptying, making sure it is properly aligned.
5. Power on the unit. There is a 3-minute delay for the compressor to start. Normal operation will resume
after time delay has ended.
6. Empty the condensate tank before moving the air conditioner to avoid any spills.
ADJUSTMENT RANGE AND OPERATION OF THE AIR DIRECTION
• The cold air duct can rotate around 360 degrees
• The cold air duct can be moved up and down by about 150 degrees.
CONDENSATE TANK
ATTENTION:
When adjusting the air outlet angle of the cold
air duct, please hold the elbow for adjustment. Do not directly
hold the cold air duct for adjustment.
ATTENTION:
The compressor has a 3-minute safety delay function. After emptying the tank, there will be
a 3-minute delay where only the fan will operate. After the 3-minutes have expired, the compressor will
activate and normal operation will resume.
• If the unit has not been operated for a long time, check the condensate tank before operating:
• Remove the condensate tank from the air conditioner and confirm the float device inside the tank is
intact. If no issues are found with the float device, re-install the condensate tank into the air conditioner,
making sure everything is aligned.
• Improper installation of the condensate tank may trigger the condensate alarm, unit malfunction, or
condensate leakage.