7
How to Remove Scaling
1. CAUTION: Always turn off the power switch and disconnect the power cord from the electrical
outlet before cleaning. If the humidifier has recently been in use, wait 20–30 minutes for unit to
cool before beginning cleaning process.
2. Remove water tank and empty it.
3. Disassemble the mist chimney by gently pushing on the blue release latch
and pulling upwards. (See Fig. 7.)
4 Remove the removable tray by pushing on the blue removable tray lift tab
and gently pulling tab upwards. (See Fig. 8.)
5. Pour 1 cup of vinegar into tank and fill the remainder of the tank with water.
6. Wipe mist chimney, medicine cup and removable tray with the
solution from the tank.
7. Put cap back onto tank and return tank to base, soaking the
heating element for 15–20 minutes. Then, gently scrub heating
element with a soft brush to remove any mineral deposits.
DO NOT
use hard brushes, steel wool or other harsh abrasives on the
heating element. Doing so will damage the heating element.
Rinse tank, base, mist chimney, removable tray and medicine cup
until smell of the solution is gone.
CAUTION: DO NOT IMMERSE BASE IN WATER.
8. Next, disinfect the unit by following the instructions below.
How to Disinfect Following Removal of Scaling
1. Pour 1
teaspoon
of bleach into the tank.
2. Fill the remainder of the tank with water.
3. Follow steps 6 and 7 of “How to Remove Scaling”
section (above).
Note: Please be careful of clothing, rugs, and other
non bleach-resistant materials when disinfecting.
Spilling bleach on clothing, rugs, and certain
surfaces may cause damage.
NOTE: USING MORE THAN 1 TEASPOON OF BLEACH PER GALLON (3.8L) OF WATER
WILL RESULT IN DAMAGE TO YOUR HUMIDIFIER.
Re-Assembling
1. Push blue tab to the open position. Place water tray and then mist chimney back on the
humidifier. Make sure they are sitting securely and the blue latch is in the closed position.
2. Snap medicine cup back in place if removed.
3. Put tank cap back on water tank and place water tank back on unit.
WEEKLY CLEANING & CARE
Continued
Fig. 9a
Fig. 9b
Fig. 7
Fig. 8
Содержание PAWM1
Страница 1: ......
Страница 2: ...INSIDE FRONT COVER BLANK ...