UNPACKING YOUR REFRIGERATOR
1. Remove all packaging material. This includes the foam base and all adhesive
tape holding the refrigerator accessories inside and outside.
2. Inspect and remove any remains of packing, tape or printed materials before
powering on the refrigerator.
Risk of Fire or Explosion due to puncture of refrigerant tubing. Flammable
refrigerant used. Handle with care when moving refrigerator to avoid either
damaging the refrigerant tubing or increasing the risk of a leak.
LEVELING YOUR REFRIGERATOR
corners of your refrigerator. After properly placing your refrigerator in its final
position, you can level your refrigerator.
•
refrigerator or by turning them clockwise to lower your refrigerator. The
refrigerator door will close easier when the leveling legs are extended.
PROPER AIR CIRCULATION
you should install it in a location where there is proper air circulation, plumbing
and electrical connections.
•
Sides……………3/4" (19mm)
Top....................2" (50mm)
Back..................2" (50mm)
WARNING: ELECTRICAL REQUIREMENT - SHOCK HAZARD
ELECTRICAL REQUIREMENT
•
proper grounding to power the refrigerator.
•
in order to accommodate a two prong outlet. This is a dangerous practice
since it provides no effective grounding for the refrigerator and may result in
shock hazard.
WARNING:
USE OF EXTENSION CORDS NOT RECOMMENDED - POTENTIAL
SAFETY HAZARD
4
INSTALLATION INSTRUCTIONS
CAUTION
Your refrigerator has two leveling legs which are located in the front bottom
Leveling legs can be adjusted by turning them counterclockwise to raise your
To ensure your refrigerator works at the maximum efficiency it was designed for,
The following are recommended clearances around the refrigerator:
Make sure there is a suitable power outlet (120 volts, 15 amps outlet) with
Avoid the use of three prong adapters or cutting off the third grounding prong
