7
INSTRUCTIONS
Timer button
This timer can be used to delay the appliance startup or shutdown, this avoids
wasting electricity by optimising operating periods.
Programming start up
Turn on the appliance, choose the mode you want, for example Dehumidify
mode. Turn off the appliance.
Press the “ ” button , the “ ” symbol starts to flash, press the “ + ” / “ - ” to
adjust the set time from 0.5-24 hours.
In 5 seconds without an operation, set the timer start function, it will display
“ ”.
Press the “ ” button again to cancel the Timer, and the “ ” symbol disappear.
Programming shut down
When the appliance is running, press the “ ” button. When the “ ” symbol starts
to flash, press the “ + ” / “ - ” to adjust the set time between 0.5-24 hours.
Within 5 seconds without operation, press the "timer" start function, it will display the
“ ” symbol.
Press the “ ” button again to cancel the Timer, and the “ ” symbol will disappear.
* Bucket full indicator
When bucket is full, the compressor and fan will shut off, “TANK FULL” symbol will
flash. In 3 minutes it will make a beeping noise, and after another 6 minutes make a
beeping noise again.
The appliance will not run until the bucket is emptied and properly placed back inside
the unit.
The bucket should be cleaned every week to prevent the growth of mold, mildew and
bacteria. Use mild detergent. Once cleaned, completely dry the bucket and place it
back inside unit.
