WC221
V. 01
–
12/12/2019
7
©Velleman nv
Switching the Alarm On/Off
1.
Press AL1/2 once to switch on alarm 1.
2.
Press AL1/2 twice to switch on alarm 2.
3.
Press AL1/2 three times to switch on alarm 1 and 2.
4.
Press AL1/2 a fourth time to switch off alarm 1 and 2.
Using the Snooze Alarm
1.
When the alarm rings, press the snooze button once to
enter the snooze mode.
2.
Press AL1/2 once to deactivate the alarm. The set alarm
will ring the next day.
Setting the Display Brightness
At normal time display, press the snooze button to set the
display brightness.
Selecting the Temperature Unit
At normal time display, press to select the temperature unit.
6.2
Weather Forecast
Synchronizing the Station and the Outdoor Unit
This weather station computes weather forecast based on
changes in air pressure. Using this set for the first time, it may
take up to 12 hours of collecting information before receiving
accurate forecasts.
1.
At normal time display, press and select the same
channel as the outdoor unit’s.
2.
Press and hold . The icon will flash to indicate the
station is synchronizing with the outdoor unit. Wait for the
synchronization to finish.
When the outdoor temperature and humidity digits show
---
, the
wireless transmission is either interrupted or lost. Press and hold
again to re-synchronize the units.
Reading the Max/Min Temperature and Humidity
1.
Press MEM once to display the maximum recorded
temperature and humidity.
2.
Press MEM once again to display the minimum recorded
temperature and humidity.
3.
Press and hold MEM to reset the recorded values.
Displaying the Air Pressure Readout
At normal time display, press and hold MEM until the calendar
displays the air pressure readout in hPa. Press and hold again to
revert to normal time display.