Perel VTBAL100, Руководство пользователя

Страница: 4 / 26

VTBAL100
V. 01 – 02/10/2018 4 ©Velleman nv
4. Batteries
WARNING
Do not puncture batteries or throw them in fire as they may explode. Do not attempt to
recharge non-rechargeable batteries (alkaline). Dispose of batteries in accordance with
local regulations. Keep batteries away from children.

Open the battery compartment and insert the batteries according to the correct
polarity.

Replace the batteries as soon as the display turns dark.

Remove the batteries after use.
5. Description
Refer to the illustrations on page 2 of this manual.
1 set/unit 2 on-off/zero
6. Operation
6.1 General Operation
1. Place the scale on a solid, level and non-slippery surface.
2. Switch on the scale. The scale is ready-to-use when the display shows 0.
3. Place the item to be weighed or the tare item in the middle of the weighing
platform.
4. To tare an item, tap the tare button. Place the item to be weighed on the scale.
5. The weight is displayed.
6.2 Setting the Clock
1. With the scale off, hold the set button pressed to enter the clock setting mode.
2. Press the set button to enter the hour and confirm with the zero button.
3. Press the set button to enter the minutes and confirm with the zero button.
6.3 12/24H Setting
In clock setting mode, press the set button until the AM/PM symbol appears/disappears
on the display.
6.4 Countdown Function
1. Press the unit button (with the scale off) or hold the unit button pressed (with the
scale on) to enter the countdown mode.
2. Press the zero button and enter the minutes with the unit button. Confirm with the
zero button. Now, enter the seconds with the unit button. The countdown starts as
you press the zero button.
3. Press the unit button to start/stop the countdown.
4. Once the countdown completed, the scale will beep. Press the zero button to
deactivate the beep, press the zero button again to clear the data.