Surface Fixed
Components:
1
.
Carefully lay 2 x legs
on a
level surface and insert
M10x200 bar and nuts.
Using
packing box as protection lay
instrument note side down on
the card. Line up pre drilled
holes in the backboard with
the legs and ensure the
instrument is aligned square
with the legs.
Fix
in place
using
M10x100mm
screw
s
supplied (see installation
guide)
2
. Attach surface plates to
each leg with M10x70mm and
Barrel nuts supplied.
( See
Surface Fix Installation Sheet)
Installation Instructions
5
. Beaters can be fixed to
Stainless Steel posts with
fixings provided
1100
Ground Surface
Pair Small
Beaters X1
22 Kg
BS EN 1176
1.5m
Weight of heaviest part
15kg
1.5m
Install Instrument
with 1.5m free space
(from widest point)
around it.
Cherub
Page 1 of 3
M10x100 Security Screw
x4
M6x20mm
Secure Screw
Eye Straps
Thread Lock Solution
Required (Not Supplied)
x2
KS1 – 750mm
KS2 – 900mm
Adult – 1100mm
Metric Conversion:
500mm/ 20”
750mm/ 30”
900mm/ 35”
1100mm/ 43”
1.5m/ 59”
Spares available form
percussionplay.com
or from your
local distributor
3
.
Locate Plates
in desired
location and mark holes to fix
to desired surface
.
M10 Barrel Nut
x2
M10x70 Security Screw
x2
Ground Anchors
not supplied
2 Part Cover Cap
x8
Surface Fix
Components:
5
. Make sure all fixings are
covered and secure using
cover caps provided
