5x40mm
Secure Screw
X4
Ground Fixed
1
.
Assemble Akadinda frame
comprising 2x ‘X’-shaped legs
and 1x horizontal beam.
(See
Assembly Guide).
Cover 8
holes on horizontal beam
using
4x30mm caps (1.1)
2
.
Locate M8x80mm eye bolts
through pre drilled holes using
flat washers on both sides of
the timber to
prevent the
fixing pulling into the timber.
Secure in place with
M8 nyloc
nuts,
cover 4 holes in ends
using
4x30mm caps. (1.3)
3
. Place Akadinda in desired
location and
mark 4 holes for
excavation.
150mm at KS2
Ground Surface
Installation Instructions
Height to centre of notes:
KS0
3-5 500mm Depth 400mm
KS1
5-7 650mm Depth 250mm
KS2
7-11 750mm Depth 150mm
Adult
900mm Surface Mounted
4
.
Excavate
holes to min depth
150mm
according to required
height for intended players.
Hole depth guide below.
5
. Locate legs in holes and
check levels prior to
concreting in place. Once
happy with location an levels,
fill
holes using rapid hardening
concrete
. Leave to dry
according to manufactures
guidelines.
(1.1)
(1.2)
(1.3)
Black Caps
X8
M10x130
Bolt X2
M8 Lock
Nut X4
M8x25 SS
Washer X8
Eye Straps
X2
M10 Wedge
NutX2
M10 x30 SS
Washer X2
5x70mm
Screw X4
Mount eye straps in the
centre of the beam 360mm
from each end to attach the
beaters.
Pair Large Red
Beaters X2
Instrument
Components:
48 Kg
Install Instrument
with 1.5m free space
(from widest point)
around it.
1.5m
1.5m
1.5m
Akadinda
Page 1 of 2
1.5m
Weight of heaviest part
28kg
(Frame)
BS EN 1176
Metric Conversion:
150mm/ 6”
250mm/ 10”
360mm/ 14”
400mm/ 16”
500mm/ 20”
650mm/ 26”
750mm/ 30”
900mm/ 35”
1.5m/ 59”
Spares available form
percussionplay.com
or from your
local distributor
