WHD-15 Full Height
Security Gate
11
•
extension sections of the full height railing;
•
the turnstile protective canopy;
•
power supply units for the turnstile and the walkway downlights;
•
a wireless remote control, remote light indicators, an intrusion detector
and a
siren.
Contact PERCo Technical Support Department if you need further consulting.
8.4 Installation checkup
Clear the passageway of all foreign objects.
Check operation of the lock and the door closer as per their respective operation
instructions (sect. 4.1). After this the gate is ready for service.
DON’TS:
•
DO NOT carry through the gate items exceeding the passageway dimensions;
•
DO NOT subject the gate to strong impact;
•
DO NOT clean the gate with substances that may cause damage
or corrosion of its parts.
9 TRANSPORTATION AND STORAGE
The gate in the original package should be transported in closed freight containers or other
closed type cargo transport units.
During storage and transportation the boxes can be stacked no more than 2 layers high.
The gate should be stored indoors at ambient temperature from –40°
С
to +45°
С
and
relative air humidity below 98% at +25°
С
. The environment should be free of acid and
alkali vapours or corroding gases.
After transportation or storage of the gate at below-zero temperatures or high air humidity,
the installation works should not start before the gate in the original package has been
kept for 24 hrs under the environmental conditions referred to in 2 of the Manual.
