Assembly and Operation Manual
Figure 8. Overall view and dimensions of the RC-panel
1, 2, 3 –
LEFT
,
STOP
,
RIGHT
buttons for mode setting;
4, 6 – green
“Left”
,
“Right”
indicators; 5 – red
“Stop”
indicator
5.2.4 Control board
Speed gate control board (Fig. 9) is installed in the central post of
Master
section. Remove the
central post cover plate in order to access the board (see Sect. 8.9.1).
The control board features a microcontroller, which processes the incoming control commands,
transferred to
Unlock A
,
Stop
,
Unlock B
and
Fire Alarm
control inputs, monitors the status of swing
panels turn optical sensors and creates commands for the motor drive of the speed gate swing
panels on the basis of the data received.
The microcontroller also creates signals on the control board outputs: for indication on the RC-
panel (
Led A
,
Led Stop
and
Led B
outputs), for the external indication (
Light A
,
Light B
outputs),
about the passage registration in the corresponding direction (
PASS A
and
PASS B
), about the
alarm (
Alarm
). The control board features:
Figure 9. Control board overall view
14
