PERCo RTD-03S, Руководство по эксплуатации

Страница: 7 / 26

Operation manual
6
Figure 2. RTD-03S waist-high rotor turnstile overall view
1 – rotary post; 2 – post with flange; 3 – cover; 4 – mechanical release lock;
5 – mechanical release key; 6 – barrier wing; 7 – filler panel; 8 – control unit;
9 – remote control panel; 10 – control cable; 11 – power cable;
12 – AC power cable; 13 – remote control cable; 14 – coupling fitting;
15 – filler panel fastening; 16 – cable connectors block
There are three control buttons on the RC front panel, which are intended for setting the turnstile
operating modes. The LED indicators are located above the buttons. The button in the middle
(hereinafter – the
STOP
button) is intended to set the turnstile to the “Always locked” mode. The
left and the right buttons are intended to unblock the turnstile for passage in the chosen direction. If
the turnstile post installation is not standard (e.g. the operator’s terminal is placed at the backside
of the turnstile post and not at the front side), the RC orientation towards the turnstile post can be
changed (ref. Note 2 to Table 1).
The RC is equipped with a buzzer for audio signal generation.