PERCo RTC-15, Руководство по сборке и эксплуатации, гарантийный талон

Страница: 6 / 22

Protective Canopy RTC-15
5 DESIGN
5.1 Main features
The canopy meets current requirements to such equipment in compliance with
GOST P 51241. The main features of the canopy are as follows:

high corrosion resistance
of the aluminium frame ensures long period of service
even in unfavourable environments;

low weight
makes the installation easier;

high durability polymeric powder keeps
the outward appearance essentially
unchanged for many years of service.
5.2 The canopy design
5.2.1 The design is shown in Fig. 3. Numbers of the position correspond to Fig.3.
5.2.2 The canopy consists:

right roof section (1) and left roof section (2) ;

four posts (3);

two bushings (7);

sealing element (9);

jointing plate (10).
Note:
“Right” and “left” names for the roof sections are conventional and correspond
to the name of the RTD-15 turnstile guide barrier section (Fig. 4 and 8), below (see
Operation Manual for the RTD-15 full height rotor turnstile).
5.2.3 The
roof sections
(1) and (2) with transparent infill, and the
posts
(3) with bottom
flanges (4) for fixing the posts to the mounting surface and top flanges (5) for fixing the
posts to the roof sections assembly, are made of high durability aluminum profile.
5.2.4 The lower parts of the roof sections should be assembled together by jointing flanges
(6), while upper parts by bushes (7), installed between gussets (8).
5.2.5 The joint line between the roof sections is covered by a self-adhesive
sealing
element
(9) and a
jointing plate
(10).
5.2.6 Each roof section has a sloping
drain
(11) for drainage.
5.2.7 Both front sides of the canopy are fixed by
fittings
to adjacent equipment (see
sect. 8.3).
5