PERCo IP-Stile KT-05.4, Руководство по сборке и эксплуатации

Страница: 8 / 14

IP-Stile KT-05.4
7
5 OPERATION BY RC-PANEL
Attention!
Set the “ Control” ACM to operate the IP-Stile from the RC-panel or the WRC.
The passage directions are independent of each other, i.e. setting an operating mode in
one direction will not change an already set operating mode to another.
Setting of the operating modes by the remote control panel/wireless remote control and
the corresponding indication is given in Table 1. Please kindly note that:
•
At first powering the «Control» ACM is set for both directions. Both passage
directions are blocked
•
For «Single passage in the set direction» mode . IP-Stile locks automatically after
passage completion in the set direction or in case the passage has not been
completed within the
Holding in unlocked state timing . The initial settings of this
timing is 4 seconds and it does not depend on the control impulse length. The time
of holding in unlocked state is counted from the moment when the command from
the RC panel or the wireless remote control is received.
•
The «Single passage in the set direction» mode can be changed to the «Free
passage in the set direction» or «Always locked» mode.
•
The «Free passage in the set direction» can be changed only to «Always locked»
mode .
•
For «Bidirectional single passage». After the passage completion in one direction
the Holding in unlocked state timing countdown for another direction begins.
Table 1. IP-Stile operating modes
№
Operating mode
Actions by the
operator
RC
indication
Turnstile
indication
IP-Stile status
1
«Always locked»
(IP-Stile is closed for
both entrance and
exit) Press the Stop
button shortly The red
indicator is on
The amber
indicators for
both directions
are on
The barrier arms are
locked in the home
position. The
passageway is blocked
by the barrier arm.
2
«Single passage in
the set direction
(IP-Stile is open for a
single passage by one
person in the set
direction and closed
for passage in another
direction)
Press shortly the
Go button
responsible for
the authorized
direction
The green
indicator
above the Go
button
responsible
for the
authorized
direction is on The green
indicator for
the authorized
direction and
the amber
indicator for
another
direction are on
The barrier arms are
unlocked for a single
turn in the authorized
direction. After the turn
the arms are locked.
3
«Bidirectional single
passage»
(IP-Stile is open for a
single passage in
each direction)
Press both Go
buttons together
shortly Both green
indicators are
on
The green
indicators for
both directions
are on
The barrier arms are
unlocked for
consecutive single
turns in each
authorized direction.
After each turn the
arms are locked in the
corresponding
direction.