Peraqua 74787, Инструкция по установке и эксплуатации

Страница: 25 / 38

For users
4
2. Operation
2.1. Notice before using
Start the water pump before starting the appliance please, turn off the appliance
before turning off water pump to avoid damage to the appliance.
Check first please for hydraulic leakage of piping connection, set water flow at a
proper speed, press ON/OFF button of the heat pump, and set suitable temperature.
2.2. Operation instructions
Symbol Designation Operation
Power ON/OFF Press to power on or off the heat pump
Mode Press to switch between Smart/Silence mode
Heat/Cool/Auto Press to switch between heating/cooling/Auto
Up/ Down Press to set desired water temperature
Note:
Desired water temperature can be set from 18~35
℃
for heating; 12~30
℃
for cooling
on the right indicates intake water temperature. on the left indicates setting
temperature by pressing buttons at the same time.
Upon switching on heat pump, fan will start in 3 minutes. In another 30 seconds
starts the compressor
④ During heating, the
will be light. During cooling, will be light. During auto
heating cooling, and will be both light.