22
- 22 - - 22 - - 22 -
It can be adjusted both when the machine is on or off.
A. Press UP-ALLOW key
or DOWN-ALLOW key
to set to your required
pool water temperature.
B. The numbers in the LED screen will flash during your operation.
C. After five seconds, it will stop flashing and be saved, the LED screen will return to
the permanent display.
D.When you want to check the temperature, press UP-ALLOW key
or
DOWN-ALLOW key
again to get it.
3
．
Time setting
It can be adjusted both when the machine is on or off.
A. Press key to set time according to your local time.
B.Time on the LED screen flashes.
C.
Press again then press
or DOWN-ALLOW key
to set hour.
D.
Before it stops flashing, press and then press
or
to set minutes
E.
After setting, press and the water temperature will appears. 30 seconds later, it
will stop flashing and the LED screen will return to the permanent display.
Automatic on/off
This function can make the machine work or stop automatically in your required time.
1. Time on
A.
Press to set timer on.
B.
When the indicator light is on and the time is twinkling, press again to set hour.
Use
and
to adjust.
C.
Before the twinkling stops, press to set minute .Use
and
to adjust.
D.
After adjusting, press “TIMER ON” and water temperature will be seen. 30
seconds later, the controller display will be back to the normal mode.
2. Time off
E.
Press to set timer off.
F.
When the indicator light is on and the time is twinkling, press again to set
hour. Use
and
to adjust.
G.
Before the twinkling stop, press to set minute .Use
and
to adjust.
H.
After adjusting, press and water temperature will be seen. 30 seconds later,
the controller display will be back to the normal mode.
3. Cancelling the automatic mode
I.
Press or to cancel timer on and off.
J.
When the number is twinkling, press . When timer indicator light is off and
LED shows water temperature, the timer on and off is canceled.
K.
30 seconds later, the controller display will be back to the permanent display.
