Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series Скачать руководство пользователя страница 45

Страница: 45 / 82

Configuration

-0

Scan Subdevices

Press the button to scan the connected HART devices. The
devices found, together with their parameters, are displayed in
the

Field Device Table

If the HART device is disconnected or its configuration
changed, a new scan must be made
Note: A scan is made every time the adapter is powered up
after connection of the battery

–

the table then fills

automatically.

Field Device Table

Displays the parameters read from the HART device by the
scan.

■

Manufacturer ID: Manufacturer of connected device.

■

Expanded Device Type Code: Device identifier as per
HART.

■

Device ID: Manufacturer

’

s device identifier.

■

Universal Command Revision Level: HART revision
supported.

■

Long Tag: Long tag of device (Message for HART revision
< 6.0).

■

Start-Up Voltage: Voltage required to start the connected
device.

■

Start-Up Time: Time required for the device to wake-up

■

Start-Up Current: Current consumed on starting the device

■

Lead Time: Time that elapses between start-up and the
point at which the device can deliver valid values. See
chapter 5.8

Parameter

Description

Default

Содержание WHA-ADP2-F8B2 Z1 Series



















































































Результаты поиска

Содержание WHA-ADP2-F8B2 Z1 Series

Отзывы:

Pepperl+Fuchs WHA-ADP2-F8B2 Z1 Series, Руководство пользователя, Страница: 45 / 82

Результаты поиска

Содержание WHA-ADP2-F8B2 Z1 Series

Отзывы: