6
Q
uick
S
tart
G
uide
WHa-adP*
Getting Started
20
18
-0
5
Figure 3.
5.
Now the WirelessHART Adapter DTM can be added. Navigate to the WHA-ADP
DTM’s. Depending on the adapter revision you have available, you need to choose
between WHA-ADP and WHA-ADP Rev. 2. Don’t worry if you’re not sure about the
revision of your device. In case of doubt, select WHA-ADP Rev. 2. If your adapter is
a revision 1 device, you will receive a corresponding error message later when you
try to connect to the adapter. In this case simply delete the WHA-ADP Rev. 2 DTM
from your project tree and add the WHA-ADP DTM.
