2018-07
40
VisuNet GMP RM/PC 200 series
Installation and Commissioning
Tightening/Plugging up the pedestal/wall arm cable glands
1. Screw the cable glands with a fork wrench.
2. To plug up cable glands that are not in use, lightly tighten the cable gland
3. Plug the plugs in.
4. Firmly thighten the cable gland.
1. Grounding
Tightening the wall bracket and hooking the device
1. Tighten the 4 screws with washer and lock washer. Use the Allen Key SW4 (Torque: 5-6
Nm).
Note!
The IP protection is ony ensured if either a cable is run or a plug is plugged in.
Note!
Fuchs recommand to use a cable with a core-cross section of 4 mm
2
for grounding.
1
