Date of issue: 12/20/2007
Part No. 197473
Mounting and
operating instructions
15
No. LED Description
Factory
setting
3
Q
A
V
N
C
QA
OK
FS
Switch operating mode (speed mode / averaging mode)
Press
T
until the „Av“ LED lights up.
The operating mode (speed / averaging) is changed by pressing
S
repeatedly.
Look at the „ZA“ LED (red). „ZA“ lights = averaging mode is active.
„ZA“ does not light = speed mode is active.
Exit the Set menu (
T
+
S
) or
go to the next setting with the
T
button.
Averaging Mode: for detecting rough surfaces. The arithmetic (fl oating)
average of 100 measured values is taken. This smoothes the measuring
result.
Speed Mode: for shortest response time and max. switching frequency
without averaging.
speed mode
4
Q
A
V
N
C
QA
OK
FS
Light/dark switching
Press
T
until the „Nc“ LED lights.
The switching function (light/dark switching) is changed by pressing
S
repea-
tedly.
Look at the „ZA“ LED (red): „ZA“ lights = switching type dark on is active.
„ZA“ does not light = switching type light on is active.
Exit the Set menu (
T
+
S
) or
go to the next setting with the
T
button..
light on
5
Q
A
V
N
C
QA
OK
FS
Activate Factory Setting
Press
T
until the „FS“ LED lights.
Press
S
once.
The sensor is reset to the factory state.
The „ZA“ LED lights for confi rmation for as long as
S
is pressed.
Exit the Set mode (
T
+
S
) or
go to the next setting with the
T
button.
6.4.3 Deactivating the Set Mode (Exit):
First press
T
, then
S
. All settings are then saved. The sensor is in the Run mode after releasing the buttons. The
operating indicator „BA“ (green) lights steadily
