Iss
u
e d
a
te
: 17
.4
.20
0
9
100
Subject to reasonable modifications due to technical advances.
© Fuchs, Printed in Germany
Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91
Internet http://www.pepperl-fuchs.com
AS-i 3.0 EtherNet/IP Gateway with integrated Safety Monitor
Operation in advanced display mode
9.8
TEST (Test tools for slaves)
Main menu ||
TEST
||
After selecting the menu TEST a warning message is displayed, pointing out, that
it is possible during this test that outputs are set and that the host may loose con-
trol over the network.
Pressing the OK button continues with the actual test, ESC/SERVICE cancels the
process.
The menu TEST contains the following sub-menus:
9.8.1
AS-I CIRCUIT (Selecting the AS-i circuit)
Main Menu ||
TEST
||
Information!
When working with a double master (AS-i master and two AS-i networks) the AS-i net-
work must be selected first by using the arrow and the OK buttons.
AS-i CIRCUIT 1
AS-i CIRCUIT 2
WARNING:
OUTPUTS MAY BE
SET AND HOST MAY
LOOSE CONTROL.
SLAVE TEST TOOL
BINARY INPUTS
BINARY OUTPUTS
ANALOG INPUTS
ANALOG OUTPUTS
PARAMETERS
SLAVE TEST TOOL: Testing the selected slave
BINARY INPUTS: State of the binary inputs
BINARY OUTPUTS: State of the binary outputs
ANALOG INPUTS State of the analog inputs
ANALOG OUTPUTS: State of the analog outputs
PARAMETERS: Value of the current AS-i parameter
AS-i CIRCUIT 1
AS-i CIRCUIT 2
