AS-i/PROFIBUS Gateway
Appendix: AS-i Slave Lists and Data Telegrams
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group · Tel.: Germany (6 21) 7 76-0 · USA (3 30) 4 25 35 55 · Singapore 7 79 90 91 · Internet http://www.pepperl-fuchs.com
is
s
u
e
d
a
te
1
2
.1
0
.1
9
9
9
53
Bit 0 (Off-line):
0 = The AS-i Master leaves the off-line phase.
1 = The AS-i Master is switched to the off-line phase.
Bit 1 (Auto_adress_enable):
0 = activates automatic slave addressing
1 = inhibits automatic slave addressing
Bit 2 (Configuration mode):
Changing the state of this bit from 0 to 1 puts the device into the configu-
ration mode.
Bit 3 (Protected mode):
Changing the state of this bit from 0 to 1 puts the device into the protected
mode.
11.3.2 Data Window for Transmission of AS-i Parameters in Advanced Mode
If in advanced mode in the byte element selection the bit for the transmission of AS-i
parameters is set, the DP I/O window is enlarged by 2 bytes. These bytes are added
to the window of the input or output data.
Structure of the bytes
DP master call:
DP slave answer: (AS-i/PROFIBUS-Gateway)
If the bit 7 in the answer byte is set, the corresponding AS-i slave could not be param-
eterized.
11.3.3 Transmission Window for AS-i Control Code in Advanced Mode
In advanced mode the additional bytes for the transfer of AS-i Control code (control
program) are filed behind the I/O data and possible AS-i parameter data in the DP-
telegram.
The length of the AS-i Control-code window is specified in the parameterization tele-
gram. It amounts between 5 and 17 bytes.
States of the Control byte:
00
hex
:
Read AS-i Control flags
80
hex
:
Write AS-i Control flags
81
hex
:
Download
byte 0
byte 1
0
0
0
bit4 bit3 bit2 bit1 bit0
0
0
0
0
bit3 bit2 bit1 bit0
AS-i slave address
answer of the AS-i slave
byte 0
byte 1
0
0
0
bit4 bit3 bit2 bit1 bit0 Err
0
0
0
bit3 bit2 bit1 bit0
AS-i slave address
answer of the AS-i slave
control byte
address byte 0 address byte 1
data byte 0
...
data byte 13
