
2
0
2
1
-0
5
48
Operation and communication
Error Codes
Description Function
AG#
Absolute angle specification
CC1_#/
CC2_#
Control code 1 or 2 with number # detected
Control code 2 is evaluated via the "Split value" function.
1
1. Should you have any questions, please contact Fuchs
CC1
Associated control code is detected.
ERR
Error message
Error codes are stored in XP00 ... XP23. Additional information on the codes
can be found in the
Error Codes
table.
LT/RT
Selected direction decision
NP
No absolute X position
O1_#/
O2_#
Orientation control code for lane. Refer to section "
Orientation O
" ().
S1_#/
S2_#
Relative position control code for lane. Refer to section "
Side S
" ().
TAG
Data Matrix tag detected
TAG#
Data Matrix tag with number # detected
WRN
Warning message
Warnings are stored in WRN00 ... WRN13. Additional information on the codes
can be found in the
Warning Messages
table.
XP#
Absolute position in the X direction, signed
YP#
Absolute position in the Y direction, signed
Z#
Distance of the read head to the code tape/ TAG in Z direction
TS#
Timestamp of image acquisition 32 bit unsigned (37.04 ns steps) (Overflow
after 159.07s)
FlashOff
Status bit flash deactivated (1: flash off, 0: flash on)
I_Ctrl
Status bit flash (1: flash off, 0: flash on)
Table 5.5
Error code
Description
Priority
2
No clear position can be determined, e.g., difference between
codes is too great, code distance incorrect
4
5
No direction decision available
2
> 1000
Internal fault
1