Pepperl+Fuchs OHV1000-series, Быстрый старт, Страница: 9 / 16

OHV1000-*
Installation
20
14-
10
9
3.2 Establishing a USB Connection
Establishing a USB Connection
1. Insert the USB plug on the connection cable into a free USB port on the PC.
This step can be carried out even during operation.
2. To switch on the handheld, hold down the trigger button for approx. two
seconds.
3. When the handheld is successfully connected, an audible signal is emitted
and the handheld will vibrate.
The handheld is now ready.
3.3 Establishing an RS-232 Connection
Establishing an RS-232 Connection
1. Switch off the PC.
2. Insert the RS-232 plug on the connection cable into the RS-232 port on the
PC.
3. Insert the low-voltage plug on the power supply unit into the low-voltage
socket on the RS-232 connection cable.
4. Connect the mains power plug on the power supply unit to the mains.