Pepperl+Fuchs BTC12N Series Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 45

Pepperl+Fuchs BTC12N Series Скачать руководство пользователя страница 8

2

0

2

0

-0

5

8

BTC12N-*

Product Description

2.2

UL Information

Suitable for use in CLASS I, DIVISION 2, GROUPS A, B, C and D hazardous locations, or non-
hazardous locations only. This equipment is an OPEN-TYPE DEVICE meant to be installed in
an enclosure suitable for the environment that is only accessible with the use of a tool.

Explanations of symbols related to safety which are used on the equipment. The Audio connec-
tor is not for operational or maintenance use in hazardous locations. Use of the Audio connec-
tor in hazardous locations could result in an explosion. The RS232 connectors are
mechanically secured by screws and the RJ45 connectors are mechanically secured by latch-
ing to prevent disconnection.

The device and its input and output circuits must be operated from a power supply that fulfills
the requirements of PELV/SELV systems.

2.3

Firmware

RM Shell 5

The VisuNet RM Shell 5 firmware allows the user to easily access applications running on a
host system via Ethernet (e.g., workplace PC or server). RM Shell 5 is based on Windows

®

10

IoT Enterprise LTSB, an embedded version of Windows

®

with long-term support that is com-

patible with the latest versions of popular remote protocols such as RDP 10 and VNC. Using
these protocols, the BTC12 and other VisuNet remote monitors can be easily integrated into all
major process control systems, whether they are virtual or they depend on conventional, work-
station-based setups.

Figure 2.3

Warning!

Explosion hazard

Do not connect or disconnect equipment unless power has been switched off or the area is
known to be non-hazardous!

Warning!

Danger d'explosion

Ne pas brancher ou débrancher l'appareil sans avoir coupé l'alimentation électrique ou si la
zone n'est pas dangereuse !

4K Ultra HD

4K Ultra HD

4K Ultra HD

4K Ultra HD

4K Ultra HD

4K Ultra HD

Virtualized

Operator

Workstations

Virtualization
Host Server

Ethernet Switch

BTC14

BTC12

VisuNet Control Center

VisuNet Remote-Monitors

«
...
6
7
8
9
10
...
»

Содержание BTC12N Series














































Отзывы:

Нет отзывов