Download Active Configurations
Click
Download
to backup the current active
settings.
Upload Configurations
To restore or change settings based on a
configuration file, click
Choose Fil
e to locate the
configuration file on the local computer, and then
click Upload.
The new settings can then be applied by clicking
the
Apply Changes
button on the page header,
or you can cancel
the procedure by pressing
discard
on the main
page of the web admin interface.
Standalone menu options > System > Reboot
Reboot the switch.
For maximum reliability, the Peplink SD Switch Series stores two copies of firmware, and each copy can
be a different version of firmware.
You can select the firmware version you would like to reboot the device with. T
he firmware marked with
(Running)
is the current system boot up firmware.
Please note that a firmware upgrade will always replace the inactive firmware Partition.
Copyright & Trademarks
Specifications are subject to change without notice. Copyright © 2020 Pepwave Ltd. All Rights Reserved. Pepwave and the Pepwave logo are
trademarks of Pepwave Ltd. Other brands or products mentioned may be trademarks or registered trademarks of their respective owners.
