Other Health Check Settings
Timeout
This setting specifies the timeout in seconds for ping/DNS lookup requests. The default
timeout is
5 seconds
.
Health Check
Interval
This setting specifies the time interval in seconds between ping or DNS lookup requests.
The default health check interval is
5 seconds
.
Health Check
Retries
This setting specifies the number of consecutive ping/DNS lookup timeouts after which
the Pepwave router will treat the corresponding WAN connection as down. Default health
retries is set to
3
. Using the default
Health Retries
setting of
3
, the corresponding WAN
connection will be treated as down after three consecutive timeouts.
Recovery
Retries
This setting specifies the number of consecutive successful ping/DNS lookup responses
that must be received before the Pepwave router treats a previously down WAN
connection as up again. By default,
Recover Retries
is set to
3
. Using the default
setting, a WAN connection that is treated as down will be considered as up again upon
receiving three consecutive successful ping/DNS lookup responses.
Automatic Public DNS Server Check on DNS Test Failure
When the health check method is set to
DNS Lookup
and health checks fail, the Pepwave router will automatically
perform DNS lookups on public DNS servers. If the tests are successful, the WAN may not be down, but rather the
target DNS server malfunctioned. You will see the following warning message on the main page:
4 AP
Use the controls on the
AP
tab to set the wireless SSID and AP settings.
Содержание Pepwave DCS-RUG
Страница 53: ......
Страница 54: ...12 5 4 Monthly All WAN Monthly Bandwidth Usage...
