PePLink Balance Series v4.0 User Manual
Page 20
6.2.4
Mac DHCP Client Configuration
1.
Open TCP/IP Control Panel.
2.
From the
Connect via
pop-up menu, select
Ethernet
.
3.
Select
Using DHCP Server
from the
Configure
pop-up menu.
(The
DHCP Client ID
field can be left blank.)
4.
Save the settings and close the TCP/IP Control Panel.
6.2.5
UNIX DHCP Client Configuration
Depending on the flavor of UNIX, the procedure may vary. The following steps are for Red
Hat Enterprise Linux 3:
1.
Login to the system as
root
.
2.
At the command prompt, type
netconfig
.
3.
When prompted with the following:
Would you like to set up networking?
Respond with
Yes
.
4.
When prompted with the following:
Please enter the IP configuration for this machine…
Select the option:
Use dynamic IP configuration (BOOTP/DHCP)
5.
Select
OK
.