25
GB
06. CLEANING AND CARE
DANGER! Risk of electric shock due to moisture
Remove the mains plug from the socket before wiping the motor block with a damp
cloth.
The motor block, the connecting cord and the mains plug must not be immersed in
water or other liquids.
CAUTION! Material damages
Do not use any harsh or abrasive cleaning agents.
After each use
Clean the appliance immediately after each use. If you wait too long, cleaning will become
unnecessarily difficult and, in extreme cases, very time-consuming. Heavy soiling may result in
permanent damages to the appliance.
1. Remove the mains plug from the socket.
2. If required, wipe the motor block and the connecting cord with a slightly damp cloth. Wipe
again with a dry cloth.
3. Remove the blender shaft from the motor block.
4. Clean the blender shaft
6
with the blender base
7
under warm running water.
Use a brush and dish liquid soap, if neccessary.
NOTES:
After having blended very salty food, you should immediately rinse the knife with clear water.
Discolouration on the plastic parts caused by certain foods can be removed with a few drops
of edible oil.
5. Allow all parts to dry completely before storing them or using the appliance again. Place
the blender shaft in an upright position (knife pointing upwards) so as to allow the water
to run out.
