People Power Press FLEX2000, Руководство пользователя

Страница: 5 / 12

CHANGING THE DIE SET:
A. Removing the dies:
A1. To swap the
die set
: Remove the
pickup dies
first. Slide
the die table all the way to the right side and simply lift out
the shallow pickup die. Repeat on the left to remove the
deep pickup die.
A2. Once both pickup dies have been removed, hold the
crimp
(top) die
firmly and pull down. The pin holding it in
place will slide out of the button press.
B. Replacing the dies:
B1. First replace the crimp (top) die by sliding the post back
into the button press.
B2. Slot the pickup dies into the holes on either side of the
die table. Make sure the shallow die is on the right and the
deep die is on the left. Make sure that. The small post on
either side of the die table inserts into the hole at the base
of the die.
LIFT
PULL
LIFT
PULL
LIFT
PULL
A1.
A2.
B2. B1.