31
4.6 Power Management Setup
Power Management Setup help user handles the ROCKY-548TX
board‘s “green” function. The features could shut down the video
display and hard disk to save energy for example. The power
management setup screen is as following,
Power Management : Disable, Max Saving, Min Saving,
or User Defined
Max Saving puts the system into power saving mode after a brief
inactivity period. Min Saving is almost the same as Max Saving
except that the inactivity period is longer. User Defined allows you to
set power saving options according to your requirement.
Note : Advanced Power Management(APM
) have to be installed
to keep the system time updated when the computer enters suspend
mode activated by the Power Management.
Under DOS environment, you need to add
DEVICE=C:\DOS\POWER.EXE in your CONFIG.SYS
Under Windows 3.x and Windows 95,you have to install Windows
with APM feature. A battery and power cord icon labeled “Power”
Will appear in the “Control Panel”
32
4.7 PNP/PCI Configuration
The PNP/PCI Configuration help user handles the ROCKY-548TX
board‘s “PCI” function. All PCI bus slots on the system use
INTA#,thus all installed PCI slots must be set to this value..
PNP OS Installed : Yes or No
When PNP OS is installed, interrupts may be reassigned by the OS
when the setting is Yes. When a non-PNP OS is installed or to
prevent reassigning of interrupt settings, select setting to No.
