37
11.3 To Finish the Traverse Measurement
Fixed traverse:
Measure the known point and press at the last
corner point.
Closed traverse: Measure the start point and press at the last
corner point with the different Point Name.
NOTE: Use a different point name (PN) when you measure the
start point as the last corner point. For example, change
“T1” to “T1-1” etc.
Open traverse: The closing errors are not calculated.No need to end
the measurement by pressing .
11.4 Traverse Calculation
To Start Fixed traverse calculation:
NOTE: To select CLOSE TRAVERSE CALC.:
To select OPEN TRAVERSE CALC.:
Start Point Coordinate setup:
or to input the known coordinate;
ENT
ENT
ENT
TRAVERSE
MENU
ENT
F4
F4
F4
x3
x4
END POINT SETUP
ENT
LIST
F2
select the
point by
F2
FIND PN
F4
F5
ACCEPT
ENT
input Point Name by
0
.
9
DEF
,
F1
TO 123
F5
ENT
input the next value or
END POINT SETUP
ESC
to quit
F5
ACCEPT
x2
PEN-R400VDN-QUICK-EN part3 23-10-2013 15:14 Page 37
