Pentax QS-1, Руководство по эксплуатации

Страница: 40 / 110

3
Sh
oo
ting
38
1
Press
A
in standby mode.
2
Use
AB
to select an item.
3
Use
V
to change the value.
4
Press
E
.
The camera returns to standby mode.
t
Memo
• Sets the adjustment steps for ISO sensitivity in [2. Sensitivity
Steps] of the
E
1 menu.
• Captured images may show more noise if a higher sensitivity
is set. You can reduce image noise by using [High-ISO NR]
of the
A
2 menu.
Choose the part of the sensor to use for measuring brightness
and determining exposure.
Set in the control panel or [AE Metering] of the
A
1 menu.
Setting the Exposure
Sensitivity
W
ISO
AUTO
Sets the range
to be adjusted
automatically.
The upper limit
can be changed.
ISO
Sets a fixed value
between ISO 100
to ISO 12800.
Auto
Applies Noise Reduction at optimally
calculated levels throughout ISO range.
Low/High Applies Noise Reduction at constant chosen
level throughout ISO range.
Cancel Cancel OK OK OK MENU
100 100
3200 3200
100 100
--
ISO ISO
AE Metering
v
/
A
1
A
Multi-
segment
Meters the brightness in multiple different
zones of the sensor.
In backlit locations, this mode automatically
adjusts exposure.
In [4. Link AE and AF Point] of the
E
1
menu, you can link the exposure and
AF point in the focusing area.
B
Center-
weighted
Meters the brightness with an emphasis
on the center of the sensor.
The sensitivity increases at the center
and no automatic adjustment is performed
even in backlit conditions.
C
Spot
Meters the brightness only within a limited
area at the center of the sensor.
Useful when the subject is small.
e_kb560_om.book Page 38 Friday, August 22, 2014 7:35 AM