Pentax OPTIO VS20, Руководство по эксплуатации

Страница: 49 / 240

47
1
Getting Started
8
Use the four-way controller (
23
)
to change the month.
Change the day and year in the same
manner.
Next, change the time.
If you selected [12h] in Step 4, the setting
switches between am and pm
corresponding to the time.
9
Press the four-way controller (
3
) to select [Settings
complete].
10
Press the
4
button.
The setting is saved and the camera returns to capture status.
[Language/ ], [Date], [Time], [Hometown], and [DST] can be
changed. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display
Language” (
1
p.183).
• To change the date and time, follow the steps in “Changing the Date
and Time” (
1
p.178).
• To change the city or turn DST on and off, follow the steps in “Setting
the World Time” (
1
p.181).
When the [Initial Setting] or [Date Adjustment] screen is displayed, you
can cancel the setting operation and switch to the capture mode by
pressing the
3 button. In this case, the [Initial Setting] screen will
appear next time you turn the camera on.
If you press the 4 button in Step 10, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
The video output format (NTSC/PAL) is set to the format of the city selected in
[Hometown] on the [Initial Setting] screen. Refer to “List of World Time Cities”
(p.221) for the video output format of each city that is set at the time of the initial
setting, and “Changing the Video Output Format” (p.185) for changing the video
output format.
MENU
Date Adjustment
Cancel
Date Format
Date
Time
Settings complete
00:00
mm dd yy / / 24h
01/01/2012
Downloaded From camera-usermanual.com