Pentax Optio 230, Руководство по эксплуатации

Страница: 47 / 124

45
T
aking Pictures
Taking Stereo Pictures (3D image mode)
You can take 3D pictures using the LCD monitor and view them by
the parallel method or cross method. If you print out the 3D pic-
tures and look at them through the 3D image viewer provided, the
image will appear in three dimensions.
z
Select [3D Image mode] on the [Applied Function] menu
and press the four-way controller (
).
x
Use the four-way controller (
) to select [Parallel] or
[Cross].
To view the picture with the 3D
image viewer, select [Parallel].
You can also view it without the
image viewer.
c
Press the OK button.
v
Press the shutter release button
while watching the capture guide.
Take the picture so that the subject
is in the shooting zone in the mid-
dle. The first image is taken and
[Move camera to right] appears on
the LCD monitor.
b
Press the OK button.
Even if you press the shutter release button halfway, you can
proceed to take the second image.
z
x .
v ,
c b
04/23/2002 04/23/2002
11:19 11:19
3 3
MENU OK
3D image mode
Applied Photo Mode Parallel mode
Rec.Mode Applied Function Set-up
3D image mode
Auto bracket
MENU OK
MENU
Shooting zone