Pentax K-30, Руководство по эксплуатации

Страница: 105 / 364

103
Sh
oo
ting
Fu
nctio
ns
4
1
Select
S
in Step 3 on p.102, and press the
4
button.
2
Press the
3
button or the shutter release button halfway.
The camera returns to the status screen and is ready to take a picture.
3
Select the desired AF point.
Available operations
Selecting the Desired Focusing Point
Four-way controller (
2345
) Changes the AF point.
4
button Returns the AF point to the center.
Press and hold
4
button Disables changing the AF point and
enables direct key operation of the four-
way controller.
To enable changing the AF point, press
the
4
button again while direct key
operation is enabled.
•
The position of the changed AF point is stored even if the focus point
selection mode is switched to
b
,
c
or
O
, or the camera is turned off.
•
If [AF Active Area] is assigned to the
V
/
Y
button in [Button
Customization] of the [
A
Rec. Mode 4] menu (p.165), press the
V
/
Y
button to enable or disable changing the AF point, and turn the front/rear e-
dial to change the AF point as in Step 4. You can move the AF point up and
down with the front e-dial (
R
), and left and right with the rear e-dial (
S
).
Press the
d
button to return the AF point to the center of the AF frame. This
is useful when operating the camera while looking through the viewfinder.
•
When [Expanded Area AF] in [AF Settings] of the [
A
Rec. Mode 2] menu is
enabled, if your subject briefly moves out from the focus point that was
selected when the focus mode was set to
k
(or when [AF.A] was
enabled), the camera will continue to focus on your subject based on
information from the focus points (back-up focus points) surrounding the
selected focus point. The back-up focus points are displayed in pink on the
status screen.
•
You will hear a beep when switching between enabling or disabling changing
the AF point. The beep can be turned off. (p.206)
1/
30
400
4.5
F
128 128
e_kb524_84percent.book Page 103 Friday, June 15, 2012 12:13 PM