2
•
Should the monitor be damaged, be careful of glass fragments. Also, be
careful not to allow the liquid crystal to get on your skin or in your eyes or
mouth.
•
Depending on your individual factors or physical condition, the use of the
camera may cause itching, rashes or blisters. In case of any abnormality,
stop using the camera and get medical attention immediately.
Warning
•
Always use the battery charger and AC adapter exclusively developed for
this camera, with the specified power and voltage. Using a battery charger
or AC adapter not exclusive to this camera, or using the exclusive battery
charger or AC adapter with an unspecified power or voltage can cause
a fire, electric shock, or camera breakdown. The specified voltage
is 100 - 240V AC.
•
Do not disassemble or modify the product. This can cause a fire or electrical
shock.
•
If the generation of smoke or strange odor from the product or other
abnormality occurs, immediately discontinue using and consult a PENTAX
Service Center. Continued use can cause a fire or electrical shock.
•
If water should happen to get inside the product, consult a PENTAX Service
Center. Continued use can cause a fire or electrical shock.
•
If you see a lightning flash or hear the thunder during use of the battery
charger and AC adapter, unplug the power plug and discontinue use.
Continued use can cause damage to the product, fire or electrical shock.
•
Wipe off the power plug if it should become covered with dust. Accumulated
dust may cause a fire.
•
To reduce the risk of hazards, use only CSA/UL certified power supply cord
set, cord is Type SPT-2 or heavier, minimum NO.18 AWG copper, one end
with a molded-on male attachment plug cap (with a specified NEMA
configuration), and the other is provided with a molded-on female connector
body (with a specified IEC nonindustrial type configuration) or the
equivalent.
About the Battery Charger and AC Adapter
Pentax_K-01_QSG.book Page 2 Wednesday, February 8, 2012 3:07 PM
