76670 -11/12-
4-6. Procedure for Ending the program soft
Finish the program soft with following procedure
①
USB Close
Click “Cl”icon and disconnect the correspond with camera
Confirmation:
「
Unconnect
」
should be display as follow
②
Click “end” icon and finish the adjustment program soft
③
Double-click hot plug icon
of the taskbar at the lower right of a desktop, and then follow "safe removal of
hardware." -> "PENTAX USB DISK Device"
④
Turn the power of the camera OFF and remove AC adaptor, USB cable
（
Battery cover and temporally bottom cover can be stayed for next adjustment
）
5. ADJUSTMENT THE PROGRAM SOFT (Digital part)
5-1 .The procedure is same as 76570 except following adjustment procedure
①
When the setting and connecting is ready, start the “SLR MTest.exe” in the CSAdjust folder
②
Input Lens ID number
③
When the program soft start, the following screen will be displayed and then wait for 20 seconds
Unconnect
76670
