Pentax 645D, Руководство по эксплуатации

Страница: 142 / 160

R32
Custo
m
Se
tting
Me
nu
A
Autofocus is performed by pressing the shutter release button
halfway. (The default setting is [On].)
The selected AF point lights red in the viewfinder. (The default
setting is [On].)
Select the number of AF points from 11 (default setting), 5 or 3.
The selected AF points are used as the focus position when the
AF point switching dial is set to
j .
Enables autofocus with the remote control. (The default setting
is [Off].)
Sets the function of the shutter release button when using the
remote control with the exposure mode set to
p
.
Sets how the Noise Reduction function works during long
exposures.
Noise Reduction will be activated when using a high ISO
sensitivity. Select [Low], [Medium] (default setting), [High] or
[Off].
Sets at which sensitivity level the High-ISO Noise Reduction
function starts to work. Select [ISO 200], [ISO 400] (default
setting), [ISO 800] or [ISO 1600]. The noise reduction process
starts from a sensitivity at or above the set sensitivity.
14. AF with Press Halfway
A
2
15. Superimpose AF Area
A
3
16. Number of AF Points
A
3
17. AF with Remote Control
A
3
18. Remote Control in Bulb
A
3
1
Mode1
(default setting)
Press the shutter release button on the remote
control unit to start exposure, and press it again to
end exposure.
2 Mode2
Continuous exposure while the shutter release
button on the remote control unit is pressed.
19. Slow Shutter Speed NR
A
3
1
On
(default setting)
The camera determines the conditions, such as the
shutter speed, sensitivity, and internal temperature,
and automatically reduces noise as necessary.
2 Off Minimal noise reduction is applied to the image.
20. High-ISO Noise Reduction
A
3
21. High-ISO NR Start Level
A
3
e_kb487.book Page 32 Wednesday, December 8, 2010 9:49 AM