Pentax 203125 - PocketJet II B/W Direct Thermal Printer, Руководство пользователя

Страница: 21 / 74

Page 13
6. Select “Installation,” select “PocketJet 200” or “PocketJet II,” and
click “continue.”
7. Complete the registration information and then click “continue,” or
click “skip” to proceed without completing the registration
information.
8. Select “Pentax PocketJet 200”or PocketJet II,” select “PDA”
(deselect any other operating system) and click “continue.”
9. Select “Symbian/EPOC,” then click “continue.”
10. Select Version 5 or Version 6, as appropriate, then click
“continue.”
11. Complete any additional warranty information requested, and then
submit it using your preferred method.
12. In order to print, you must disable the “Remote Link” by setting it
to “off.”
• Manual Install
1. Establish a connection from your Psion/Symbian/EPOC device to
your PC. You must have installed the connection software that
came with our device to do this.
•
Enable “Remote Link.” Select “System:File Menu:Tools:Remote
Link” and choose the desired interface method, Infrared or Cable.
•
Make sure no other applications have control of the port. Select
“Mobile Devices:File:Communications:Auto Connect” and choose
“Only While Mobile Devices Window Is Open.”
2. Insert the Driver Disk CD into the CD drive on your PC.
3. From the “Start” menu, choose “Run.”
4. Choose “Browse” and locate the most appropriate Pentax.sis file
on the CD:
•
<CD Drive>:\<PJ2 or PJ200>\EPOC-Symbian\<ER5 or
ER6>\Pentax.sis.
5. Choose “OK” and follow the on-screen instructions.