Pentair ULTRATEMP HXi, Руководство пользователя

Страница: 30 / 40

Page 30
System Protections / Error Codes
When a fault occurs, the fault icon in the main interface will flash. When an error occurs or the protec-
tion mode is set automatically, the wired controller will display an error code as below. To view fault
codes, swipe left and tap . The fault log will be displayed. You can clear fault codes, after trouble-
shooting by tapping the trash can.
Code Fault Message Possible reasons Remedy
P01 Inlet Temp. Sensor Fault The inlet temperature sen-
sor is broken or short cir-
cuited. Check or change the tem-
perature sensor.
P02 Outlet Temp. Sensor Fault The outlet temperature
sensor is broken or short
circuited. Check or change the tem-
perature sensor.
P04 Ambient Temp. Sensor Fault The ambient temperature
sensor is broken or short
circuited.
Check or change the tem-
perature sensor.
P05 Coil 1 Temp. Sensor Fault The coil temperature sensor
is broken or short circuited. Check or change the tem-
perature sensor.
P15 Coil 2 Temp. Sensor Fault The coil temperature sensor
is broken or short circuited. Check or change the tem-
perature sensor.
P07 Suction Temp. Sensor Fault The compressor suction
temperature sensor is bro-
ken or short circuited. Check or change the tem-
perature sensor.
P081 Discharge Temp. Sensor
Fault The compressor discharge
temperature sensor is bro-
ken or short circuited. Check or change the tem-
perature sensor.
P082 Exhaust Air over Temp Prot. The compressor is overload-
ed. Exhaust temperature is
high. Check whether the system
of the compressor is running
normally.
Maintenance & Troubleshooting